Z Cuffs
Very heavy 90 degree wrist cuffs with built-in recessed locks for each cuff.
 
Rigid Fiddle
Joins the neck and wrists very effectively, secured with a standard padlock.
Cuffs with chain
Ankle cuffs with recessed locks.
Wrist Cuffs with chain
Wrist cuffs with recessed locks.
Rigid Collar
Extremely heavy collar (8 pounds), recessed lock, optional chains can be connected in front or back.
Spreader Bar - Jo
Holds wrists and ankles, secured with two padlocks. The width of this spreader bar is 26 inches.
Rigid Fiddle 00
A variation on the original Rigid Fiddle (above) with wrists in-line with the neck. Secured with a standard padlock.
Rigid Cuffs XL
Wrist spreader bar, approximately 18 inch span between cuffs, center pin allows front or back chain attachment point.
Double Collars with chain
Two collars connected by chain, each collar secured by recessed lock.
Rigid Stock TL
Neck and wrists are secured by three separate padlocks. Wrists are free to rotate.
Cuff RL
3 layer ankle cuff secured by single padlock.
Rigid Fiddle Stradivarius
3 layer fiddle with custom internal locking mechanism which allows the Fiddle to be closed and locked without using the key. (no padlock required)
Cuff 8 (7 layer)
Extremely heavy ankle cuffs (7 layers) featuring a single recessed lock in the center.
Cuff 8 (5 layer)
5 layer ankle cuff (similar to 8 layer Cuff-8 above) Single recessed lock.
Double Fiddle
Holds the neck and wrists of two subjects at the same time! Secured with two padlocks.
Stock XL-TL
Wrist stock or ankle stock - order custom inserts. Secured by two padlocks.
Rigid Fiddle - transparent plastic
Same design as Rigid Fiddle above, but made of transparent plastic. Joins the neck and wrists very effectively, secured with a standard padlock.
Rigid Fiddle - red plastic
Same design as Rigid Fiddle above, but made of red plastic. Joins the neck and wrists very effectively, secured with a standard padlock.
Back-to-Back Double Fiddle Stradivarius
Similar to the Double Fiddle shown above, only the two subjects are secured back-to-back, facing outwards. In addition, an internal locking mechanism allows the Fiddle to be closed and locked without using the key. (no padlock required)
Stock-D
Super large and heavy stock which holds both the wrists and ankles. Inserts allow the wrists and ankles to rotate freely.
Belt Handcuffs
Commercially manufactured handcuffs which are integrated into a custom circular aluminum frame and attached to a leather belt which circles the waist.
Jail Bar Collar
Special collar that is made to close around a jail cell vertical bar at the same time it is closed around the neck - which holds the prisoner to the jail cell wall.
Bondage Chair
Chair has cuffs for both the wrists and legs. Subject sits with legs spread and crotch exposed. Curved brackets above the ankle cuffs prevent the legs from slipping off the chair.
Handcuffs - S
Similar to Rigidcuffs-XL at the top of this page, only a shorter span and no center pin for chain attachment.
Handcuffs - E
Similar to Rigidcuffs-XL at the top of this page, only manufactured at a 25 degree angle, a shorter span and no center pin for chain attachment.
Rigid Cuffs - B
No information yet.
Rigid Collar - 2 hasps
Same as the Rigid Collar at the top of this page, only this collar has two steel chain loops on the top of the collar for overhead connection, or, turn the collar over for connection to the floor. Collar is extremely heavy (8 pounds), recessed lock.

Rigid Collar - 4 hasps

Same as the Rigid Collar above, only this collar has slots for connecting 4 steel chains (or loops) instead of just two. Collar is extremely heavy (8 pounds), recessed lock.
 
Cuff Stock
Similar to Rigid Stock at the top of the page, only the cuffs for the wrists hinge like traditional handcuffs. The center neck opening is secured with a standard padlock.
Rigid Stock TL - red
plastic
Same as Rigid Stock TL at the top of this page, only made of red plastic. Neck and wrists are secured by three separate padlocks. Wrists are free to rotate.
Rigid Collar - thin
Same as the Rigid Collar shown at the top of this page, only this collar is not as thick and heavy. It has a smaller recessed lock, and a 1.5 inch diameter steel ring for attaching the color to a chain.
Rigid Collar - Tall
Same as the "Rigid Collar - thin" shown directly above, only this collar is extremely tall. It's made with 13 aluminum layers and is approximately 10.5 mm high. It has 4 attachment points for chains around the outside perimeter. These collars can be manufactured in any custom height by adding or subtracting layers.
Rigid Fiddle Stradivarius with chain cross-holes
Same as Rigid Fiddle Stradavarious above. In addition, a cross-hole allows a chain to pass through the fiddle for use as a leash or for locking to other shackles.
Chain Cuffs
These unique cuffs are designed to be used with a chain. The cuff is attached to the chain by passing the chain through a unique "X" hole in the cuff. By seting an internal screw the cuff can be locked in any position along the chain. The cuffs can be made in custom sizes for ankles, wrists and neck.
Spreader Bar - Jo-2
Same design as the 26 inch SpreaderBar-Jo shown above, only this one is 24 inches in width.
Spreader Bar - L
Same design as the 26 inch SpreaderBar-Jo shown above, only this one is designed only for the ankles and is 24 inches in width.