E-Collar
Radio controlled locking shock collar
I have made a short video clip about this collar at the IML convention in Chicago. If you would like to see it, send me an email. I will send you the Realmedia file. It is about 2 MB in size.

 

Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 130 mm, about 5.1 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.

 

RigidCollar with snap in mechanism
 

 

Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 130 mm, about 5.1 inches. Other sizes available, see below.
Height = 6 layers or about 43 mm
See below for prices and ordering.

 

E-Collar (R2)
Radio controlled locking shock collar
I have made a video which shows this E-Collar in action. The video is titled "Stocks and Shocks" and can be found on the RigidCuff site.
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 135 mm, about 5 5/16 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
Weight of this size collar is near 2Kg.
Contact me for prices and ordering: Martin@RigidCuff.com
Rigid Collar - with two loops
Closes with with secure locking cylinder. Provided with 2 loops at the sides
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of collar in photo = 110 mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - two loops on top
Closes with with secure locking cylinder. Provided with two loops on the top
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110 mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - attachment points for 4 chains on top, 4 on bottom
Provided with 8 slots and removable pins for attaching chains. 4 slots and pins are on the top (shown in photo) and 4 are on the bottom. Closes with with secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 140mm, about 5.5 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - Thin
This collar is not as thick as the standard collars, which decreases it's weight. Provided with two loops on the side
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 5 layers x 8mm = 40 mm, or about 1.6 inches
See below for prices and ordering.
Rigid Collar - chain can be attached or removed
Chain atachable or removeable. (chain not included, customer to supply chain of any length)
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Two Rigid Collars - connected with chain
Chain atachable or removeable from each collar. (chain not included, customer to supply chain of any length)
Collars close with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Small collar:
Inside diameter of the collar in the photo = 110mm, about 4.33 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
Large collar :
Inside diameter of the collar in the photo = 130mm, about 5.10 inches. Other sizes available, see below.
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
See below for prices and ordering.
Rigid Collar - with ring
Provided with one steel ring
Closes with with small secure locking cylinder
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter = 115 mm
Outside diameter of the collar in the photo = 157 mm. Other sizes available, see below.
Height = 40 mm (about 1.6 inches)
Weigt about 1.2 kilogram
See below for prices and ordering.
Rigid Collar - Oval
This collar was made with custom deminsions, which created an oval neck opening.
The two chains can be removed or replaced by inserting a special wrench into the collar.
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter = 120 x 130mm, or 4.72 x 5.1 inches
Outside diameter of the collar in the photo = XXX mm. Other sizes available, see below.
Height = 56 mm (about 2.2 inches)
Weigt about XXX kilogram
See below for prices and ordering.
Rigid Jail Collar - attaches to vertical bars of jail or cage
Fits around 3/4 inch diameter vertical bars
Lockable with bolt and padlock
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 140 mm, 5.5 inches. Other sizes available, see below.
Outside diameter = 210 mm, 8.3 inches
Height = 5 layers x 8mm = 40 mm, or about 1.6 inches
Weigt about 2.4 kg
See below for prices and ordering.
Rigid Collar - with removable pins for ataching up to 6 chains
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 110 mm, about 4.3 inches. Other sizes available, see below.
Outside diameter = 170 mm (6.7 inches)
Height = 7 layers x 8mm = 56 mm, or about 2.2 inches
Weigt = about 2 kg
See below for prices and ordering.
 
Custom Made Large Rigid Collar
including removable pins for ataching up to 6 chains
Material: Aluminium ( AlCuMg1 / AlMgSi1 )
Inside diameter of the collar in the photo = 162 mm, about 6.4 inches.
Outside diameter = 266 mm, about 10.5 inches
Height = 8 layers x 8mm = 64 mm, or about 2.5 inches
Locks with standard locking cylinder
Weigt = about 6.1 kg
Prices and Sizes
Price for standard designs with 5 layers up to 140 mm diameter (40 mm height = about 1.57 inches): 320 EURO
 
Price for standard designs with 6 layers up to 140 mm diameter (40 mm height = about 1.57 inches): 350 EURO
Price for standard designs with 7 layers up to 140 mm diameter (56 mm height = about 2. inches ): 370 EURO
Price for the CageCollar in standard design and standardsize with 5 layers (40 mm height = about 1.57. inches ): 340 EURO other currencies
All collars are available in these standard inside diameters = 100, 110, 120, 130, 140 mm (150mm available too)
Custom designs are always welcome. Contact Martin with your ideas.
Shipping to the old European Union, USA and Canada by regular mail included.
Shipments via FedEx can also me made.
Contact Martin for various payment options.
Email: Martin@RigidCuff.com
Phone (local San Francisco number) 1 - 415 - 200 - 4515
Eve Secured in Steel
Click HERE to see this collar used on our model Eve, available via straming video pay-per-view or DVD.
Martin's Rigid Cuffs
Click HERE to see Martin's gear in use, available via straming video pay-per-view or DVD.
 

home